All Products
Sort by
Show result

Nippon 8000 Advance Wall Sealer


Excellent efflorescence resistance, good alkaline resistance, excellent hiding a, low odour and VOC, its green choice where its safer for your health and the sealer water-based.suitable for exterior.



> Excellent efflorescence resistance

> Low odour and VOC

> Suitable for exterior and interior

> For new & repainting wall


Powerful: Powerful 720 W motor and 2.0 J impact enerhy for effective hammer drilling in concrete

Versatility: Three-mode rotary hammer for hammer drilling, drilling, and chiselling ensuring versatility and convincing results

Affordability: Compact rotary hammer offers professional Bosch hammer performance within reach

  • Features : Code WBFA300775CP
  • Application Place Kitchen
  • Finish Chrome
  • Installation Type Wall Mounted
  • Type of Cartridge Ceramic Headwork
  • Aerator Type Integrated Aerator
  • Water Connection Thread 1/2"
  • Max. Cont. Working Pressure 500kPa
  • Min. Cont Working Pressure 100kPa

Accessories Included:

1pcs Auxiliary Handle

1pcs Spanner 1set Carbon Brushes

  • Finishing Polished
  • Material Metal
  • Fixing Kits Included
  • Installation Type Wall Mounted
  • Size (L x W x H) 91 x 91 x 415 mm
  • Finishing Polished
  • Material Metal
  • Fixing Kits Included
  • Installation Type Wall Mounted
  • Size (L x W x H) 444 x 40 x 174 mm

• Good durability

• Fungus resistance

• Excellent gloss

  • Finishing Polished
  • Material Metal
  • Fixing Kits Included
  • Installation Type Wall Mounted
  • Size (L x W x H) 805 x 111 x 35 mm
  • High Quality Ceramic Disc Cartridge : Endurance tested against European Standard (500,000 cycles of cartridge)
  • High Quality of Chrome Plating : High corrosion resistance and long lasting shine (200 hours of salt spray test)
  • Developed under stringe quality control processes
  • Products complies with PUB Standard
  • Soft movement of faucet lever
  • Material : Non-hazardous alloy material approved under the "European Positive List"

Dulux Weathershield Roof is a high quality, highly durable 100% acrylic based emulsion with a smooth finish and mid sheen.


Surfaces must be sound, clean, dry and free from all defective or poorly adhering material, dirt, grease or wax and be thoroughly rubbed down using a suitable abrasive paper and dusted off. It is important to ensure that your wall is smooth and even to obtain the best results from Dulux Pure.Treat areas affected by mould, fungi or algae with Dulux Fungicidal Wash (A980-19260). If after thorough preparation, surfaces remain powdery, seal with one coat of an appropriate Primer (see below). It should not be applied on areas where moisture reading (as measured by Protimeter) exceeds 17%. These wall should be left to dry further.


Product Features:

- Long-lasting

- Washable

- Fungus resistant

- Good scrub resistance

- Can be used as chalkboard paint


Lightweight, compact and durable for light Home cleaning usage Induction Motor High Pressure Cleaner.


Technical data

Rated power input 750 W

No-load speed 0 - 3000 rpm

Power output 351 W

Weight 1.9 kg

Drill spindle connecting thread 1/2"-20 UNF

Chuck capacity 1.5 - 13 mm

Impact rate at no-load speed 0 - 48000 bpm

Drilling dia. in concrete 16 mm

Drilling dia. in wood 30 mm

Drilling dia. in steel 12 mm


Cordless Power Tool,

1 pc TDLI1211 Li-ion Cordless Drill

1 pc 12V Lithium-ion 1.5Ah battery

1 pc 2 hours charger (220-240V ~ 50/60Hz)

1 pc Cr-V Bit, 65mm


1 pc Mini claw hammer

1 pc Mini hacksaw

1 pc Combination Pliers, 7″

1 pc Adjustable Wrench, 6″

1 pc Steel Measuring Tape, 3m

1 pc Test Pencil, AC: 100-500V

1 pc Slotted screwdriver, SL5.5 * 100mm

1 pc Phillips screwdriver, PH1 * 100mm

1 pc Snap-off Blade Knife

5 pcs Twist Drill Bits (2, 3, 4, 5, 6mm)

4 pcs Wood Drill Bits (4, 5, 6, 8mm)

1 pc PVC Insulation Tape, 0.19mm * 18mm * 9.15m

1 pc Magnetic Bits Holder

7 pcs 1/4″ Hexagonal Socket (5, 6, 7, 8, 9, 10, 11mm)

20 pcs Screwdriver bits: SL3, SL4, SL5, SL6, PH0, PH1, PH2, PH3, PZ0, PZ1, PZ2, PZ3, T10, T15, T20, T30, H3, H4, H5, H6

40 pcs Screws (25 pcs * ST3.5, 10 pcs * ST4, 5 pcs ST5)

40 pcs Plastic Plugs (25 pcs * 5mm, 10 pcs * 6mm, 5 pcs * 8mm)