All Products
Sort by
Show result
  1. - Dirt blaster
  2. - High-pressure hose, 6 m
  3. - Detergent application via, Suction
  4. - Vario Power Jet
  5. - Wash brush
  6. - Integrated water filter
RM566.00
RM629.00

Using steam to tackle dirt: the Kärcher SC 2 Upright EasyFix cleans every sealed hard floor – even wood. With its preset and easy-to-operate steam flow control in 2 stages, thorough cleaning with the Kärcher steam cleaner removes up to 99.999% of coronaviruses* and 99.99% of all common household bacteria** from hard surfaces. The steam cleaner heats up in an instant and is immediately ready for use with a fillable and removable fresh water tank, incl. descaling cartridge. The operating status of the device is visible with the colour codes of the LEDs at the handle. The combination is perfect: for even more thorough cleaning and fast changeover of cloths without any contact with dirt, the Kärcher microfibre cloths are fastened to the floor nozzle EasyFix by means of a hook-and-loop fastener.

RM566.00
RM899.00
  • Features : Code WBFA301348CP
  • Application Place Bathroom
  • Finish Chrome
  • Installation Type Deck Mounted
  • Type of Cartridge Ceramic Headwork
  • Aerator type Coin slot PCA
  • Water Connection Thread 1/2"
  • Max. Cont. Working Pressure 500kPa
  • Min. Cont Working Pressure 100kPa
  • WELS Measure 4 Litres Per Minutes
  • WELS Rating 1 Tick
RM563.55
RM699.00
  • Finishing Polished
  • Material Metal
  • Fixing Kits Included
  • Installation Type Wall Mounted
  • Size (L x W x H) 69 x 119 x 190 mm
RM561.00
RM841.50

Model : EVO - i

Pump Type : DC Pump

Pump Rating : 36W Noise Level : <40dB

Heater Power Rating : 3.64kW 240V~ 50Hz

Water Connection : 15mm (1/2” BSP), Single Point System

Operating Condition : Open Outlet

Protection Against Electric Shock Class 1

Water Temperature Control : Electronics

Degree of Protection : IP25

Minimum Flow Rate : 3 Liters / Minute

Minimum Pressure : 20 kPa (0.2 bar/2.9 psi)

Maximum Inlet Pressure : 0.38 MPa (3.8 bar / 55psi)

Heater Dimension : 230mm (W) x 360mm (L) x 87.8mm (H)

RM558.00
RM698.00

- Part No : 0 601 581 59F

- Rated power input : 580 W

- No-load stroke rate : 500

- 3100 Spm

- Weight without cable : 2.4 kg

- Stroke height : 26 mm

- Cutting depth in wood : 85 mm

- Cutting depth in aluminium : 20 mm

- Cutting depth in non-alloyed steel : 10 mm

RM557.00
RM659.00

Weatherbond Solareflect is pure acrylic-based paint with non-added lead and mercury. It is specially formulated with low VOC and low odour for exterior walls to protecting the exterior surfaces from the extremities of Malaysia's weather. It also provides a tough finish that resists colour fading from UV light and the build-up of dirt, mould and algae. The innovative Solareflect technology reduces surface temperature by up to 5°C. It makes the interior cooler, thus helps in saving energy.

RM550.00
RM650.00

Code : HM-DB-8445A-ST

Size : L 840 x W 450 x D 230mm

Thickness : (Face)3.0mm + (Bowl)1.0 mm

Material : SUS304

RM548.00
RM716.00

Code : HM-DB-7745A-ST

Size : L 840 x W 450 x D 230mm

Thickness : (Face)3.0mm + (Bowl)1.0 mm

Material : SUS304

RM548.00
RM716.00

Brand               Johnson Suisse

Code                WBFA301315CP

Application Place              Bathroom

Finish                                Chrome

Installation Type                Deck Mounted

Type of Cartridge              Ceramic Headwork

Aerator type                      Coin slot PCA

Water Connection Thread               1/2"

Max. Cont. Working Pressure           500kPa

Min. Cont Working Pressure             100kPa

WELS Measure                                 4 Litres Per Minutes

WELS Rating                                     1 Tick

RM545.70
RM699.00

Product Description: NIPPON EA4 FINISH is a two-pack amine-adduct cured epoxy finish for use on steel and cement surfaces where chemical, oil and abrasion resistant coating is required.

RM545.00
RM650.00

∙Good resistance to mechanical damage and abrasion

.Excellent adhesion

∙Highly durable

RM545.00
RM650.00
  1.  High Quality Ceramic Disc Catridge : Endurance tested against European Standard (500,000 cycles of cartridge)
  2.  High Quality of Chrome Plating : High corrosion ressistance and long lasting shine (200 ours of salt spray test)
  3.  Developed under stringet quality control processes
  4.  Products complies with PUB Standard - Soft movement of faucet lever
  5. Material : Non-hazardous alloy material approved under the "European Positive List"
RM544.85
RM699.00

Product Description

Voltage : 20V

No-load speed : 0-450/0-1900/min

Max.impact rate : 28500/min

Max.torque : 55NM

Chuck capacity : 2.0-13mm

Torque settings : 23+1+1

Auto lock keyless chuck

Mechanical 2-speed gear

Spindle lock function

20V Lithium Ion 2.0Ah batteries

With 2pcs battery pack

With 1pc 1Hr charger

Charge volts : 110V-240V~50/60Hz

RM540.00
RM699.00
Specifications
Model no. TAPLI2002
Voltage 20V ⎓
No-load speed 2000-4800/min
Diameter of sanding pad 125mm
Dimensions 40cm * 17cm * 15cm
Battery Not included, compatible with 2.0Ah and 4.0Ah batteries
Charger Not included
Weight 2.2kg
Suitable with 2.0Ah Battery Pack4.0Ah Battery Pack
RM540.00
RM692.00